M1.6×0.35 Thread Specifications
Complete dimensions for M1.6×0.35 coarse pitch thread per ISO 724. Pitch: 0.35mm (72.6 TPI equivalent).
Thread Dimensions
| Designation | M1.6×0.35 |
| Thread Series | ISO Metric Coarse |
| Pitch | 0.35 mm (72.6 TPI) |
| Major Diameter (d) | 1.6 mm (0.063") |
| Pitch Diameter (d₂) | 1.3727 mm (0.054") |
| Minor Diameter — External (d₁) | 1.1706 mm (0.0461") |
| Minor Diameter — Internal (D₁) | 1.2211 mm (0.0481") |
| Thread Depth | 0.1894 mm |
| Tensile Stress Area | 1.22 mm² |
| Fundamental Triangle Height (H) | 0.3031 mm |
Tap Drill Size
Recommended tap drill: 1.2 mm
Calculated minor diameter (D₁): 1.22 mm. Closest standard metric drill: 1.2 mm.
Closest inch drill: 3/64" (0.0469" / 1.19 mm)
Proof Loads by Property Class
| Class | Proof Stress (MPa) | Tensile Strength (MPa) | Proof Load (kN) | Tensile Load (kN) |
|---|---|---|---|---|
| 4.6 | 225 | 400 | 0.3 | 0.5 |
| 4.8 | 310 | 420 | 0.4 | 0.5 |
| 5.8 | 380 | 520 | 0.5 | 0.6 |
| 8.8 | 580 | 800 | 0.7 | 1.0 |
| 9.8 | 650 | 900 | 0.8 | 1.1 |
| 10.9 | 830 | 1040 | 1.0 | 1.3 |
| 12.9 | 970 | 1220 | 1.2 | 1.5 |
Proof load = stress area × proof stress. Per ISO 898-1.
Common Applications
- Electronics
- Instrument screws
- Watch mechanisms
- Small fasteners
How M1.6×0.35 Dimensions Are Calculated
All dimensions on this page are calculated from ISO 724 formulas using the nominal diameter (1.6 mm) and pitch (0.35 mm):
- Fundamental triangle height: H = (√3/2) × P = 0.3031 mm
- Pitch diameter: d₂ = d − 0.6495 × P = 1.3727 mm
- Minor diameter (external): d₁ = d − 1.2269 × P = 1.1706 mm
- Minor diameter (internal): D₁ = d − 1.0825 × P = 1.2211 mm
- Thread depth: 5H/8 = 0.1894 mm
- Tensile stress area: Aₛ = (π/4) × ((d₂ + d₃)/2)² = 1.22 mm²